It’s time to eliminate your ceramic coating! But how can we properly remove ceramic coating? Let’s find out with CT-Detailing!
Thank you for reading this post, don't forget to subscribe!Why should we need to remove ceramic coating?
Bad Ceramic Coating Installation
- The surface may not be spotless and sanitized.
- You might apply too much or too little product and fail to spread it evenly over the surface.
- You may forget to wipe it away after it has flashed.
- You may not allow enough time for the ceramic coating to dry before driving away.
These inaccuracies can result in various problems, including high spots, uneven thickness, retained dirt and pollutants, reflection haze, and overall poor finish and quality.
Failed Ceramic Coating
- Your car’s luster has begun to fade.
- The surfaces have lost their smooth, slick appearance and have turned sticky.
- Water no longer beads off the surfaces.
- More filth and grime begin to accumulate on the body.
How can we remove Ceramic Coating?
There are many ways to remove ceramic coating but here are three effective methods.
Chemical Removal
Ceramic coatings are incredibly resistant to most chemicals, however, they do not have the same strong connection with alkaline compounds. Many individuals utilize alkaline treatments to eradicate the ceramic covering layer. However, it should be cautioned that alkaline chemicals are quite strong in nature and, if not handled correctly, might harm the paintwork below.
Making Use of Polishing
Many experts believe that polishing is the most effective and dependable method of removing the car’s damaged layer of ceramic coating. Polishing is also helpful for prepping the car’s surface for the new ceramic coating application. It eliminates minor flaws from the car’s paintwork, preparing it for the following coat. Often, greasy substances remain on the automobile’s surface regardless of how much water is used to clean it.
Using Sandpaper
Sand the coated area with 1000 grit or higher grit sandpaper through the ceramic coating layers until the clear coat has an even milky look. Once you’ve arrived at this phase, the procedure for working on the panel is identical to that of any other vehicle-painted surface.
What are the problems when we remove ceramic coating?
A ceramic coating contains part of the SiO2 and Si3D components used to produce pottery glaze. When these silicates are put on the automobile’s surface, they harden.
This feature of ceramic coating protects the car’s paint against harsh conditions. This hardness is also the most significant issue when removing the previous ceramic coating.
Regular clays and finishing polishes typically have relatively little influence on the automobile’s surface. When you apply wax or sealants to the exterior of your car, you may easily remove them using clays or polish. On the other hand, Ceramic coatings generally require a strong polish and a degreasing chemical to remove the layer.
Ceramic Coating at CT-Detailing in Louisville, KY
We offer high quality ceramic coating with superior products and professional detailers! Call CT-Detailing in Louisville, KY, at (502)-939-2887 to book an appointment! We are ready to assist you today!
